W-1394-IDE External IEEE1394 to IDE Adapter

W-1394-IDE IEEE1394 to IDE External Case
Features:
	SBP-2 Target Revision 4 compliant interface
	Fully ATA-4 compliant (see T13-1153D)
	Sustained IDE transfer rate of 25 Mbytes per second, Peak transfer rate of 50Mbytes per second.
	Supports PIO modes 0 to 4, DMA modes 0 to 2 and Ultra DMA modes 0 to 2
	Integrated 32-bit RISC processor (ARM7TDMI) with on-chip scratch RAM
	ORB co-processor to accelerate translation of ORBs to ATAPI commands
	Supports ORB chaining for increased performance
	High performance ATA command translation in firmware using Reduced Block Command (RBC) set
	Optional External Serial ROM interface for configuration data, user serial number, etc.
	Blank Flash memory programming feature via 1394 bus
	Firmware and Flash Programming Utilities supplied by Oxford Semiconductor
	For applications that need sustained data transfer rates in excess of 10 Mbytes/s
	3.3 Volts operation,Low Power CMOS,ultra-thin 128-TQFP package (14mm x 14mm x 1mm )
	Microsoft Win98-Second Edition, Win2000 and Apple MacOS 8.5 generic driver support
	Buffer Manager with max. RAM bandwidth of 800Mbps
	Compatible with 1394-1995 and 1394A Phys.
	S400 compliant 1394-1995 Link and Transaction layers
	For 51/4 " or 3.5" IDE HDD or CD-ROM ... etc