W-1394RPP Internal IEEE1394 Repeater(3.5" Pannel) |
|||
|---|---|---|---|
W-1394RP External IEEE1394 Repeater |
|||
| Features: | |||
 |
Full P1394a additional function support |  |
|
|
Supports optional 1394 Annex J electrical isolation barrier at PHY-link interface | ||
|
Supports power-down feature to conserve energy in battery powered applications | ||
|
Cable power presence monitoring | ||
|
Separate cable bias (TPBIAS) and driver termination voltage supply for each port | ||
|
Firewire one port in,Two port out | ¡@ | ¡@ |
|
Encode and decode functions included for data-strobe bit level encoding | ||
|
Supports LPS/link-on pin for PHY-link interface | ||
|
Incoming data resynchronized to local clock | ||
|
Single 24.576 MHZ crystal provides transmit/receive data at 100/200/400 Mbits/s and LLC clock at 49.152 M | ||
|
Node power-class information signaling for system power management | ||
|
Adaptive equalizer | ||
|
Provides three fully compliant cables ports at 100/200/400 Mbits/s and available with one,two or three ports | ||
|
Single 3.3V power supply | ||
|
Fully supports provisions of IEEE1394-1995 for High- Performance Serial Bus and the P1394a draft 2.0 standard | ||
|
Fully compliant with Open HCI requirements | ||
[Home][about WINIC][DRIVER index][service & support][FAQ][inquiry form]
 |
WINIC CORP.
Copyright(c)1996 All rights reserved. 5F 298, CHUANG CHING ROAD, TAIPEI, TAIWAN, R.O.C. TEL: 886-2-27290688/27290673 FAX:886-2-27290677 |