Palm Family 10Base-T 5Port/9Port Hub & 3Port Repeater
dbar2.GIF (865 bytes)
The Palm Family is ideal for very small workgroups on shielding twisted-pair(STP) cables or coaxial cables(BNC). They are including 5, 9 port Hub and 3 port Repeater. The products comply to IEEE802.3 10Base-T, 10Base2, and 10Base5. You can use the BNC or STP (Uplink or Downlink) to extend your network.
The equipment can be installed almost anywhere even at installation sites with very limited spaces. Flexible to install, it is ideal for small workgroups and clean-connection. It takes little space on a desktop, the light weight allows it to be easily mounted on a wall and is almost invisible on the office.
Features & Benefits
dot2.GIF (838 bytes) Compliance with IEEE802.3 standard, 10Base-T, 10Base2 and 10Base 5.
dot2.GIF (838 bytes) Support LEDs for easy diagnosis and maintenance.
dot2.GIF (838 bytes) Support AUI or BNC connector, or Shielding RJ-45 (One port supports Up-link or Down-link)
dot2.GIF (838 bytes) Provide convenient up-link port to use cascade the HUBs.
dot2.GIF (838 bytes) Slim case for space-saving
dot2.GIF (838 bytes) On board transceivers for direct connection to thin cable network.
dot2.GIF (838 bytes) Automatically partition in the event of cable failure or collision; automatically reconnection when no more cable failure.
dbar2.GIF (865 bytes)

Back to list
Winic Corp.
5 fl,no.298,CHUANG CHING RD,TAIPEI ,TAIWAN,R.O.C
Tel: 886-2-27290688    Fax: 886-2-27290677      URL:http://www.winic.com Email: [email protected]