W-ISC-1 IDE To SCSI Card
FEATURES:
SCSI-2 and ANSI SCSI-3 Fast-20 StandardsSupports ANSI
High speed data transfer: SCSI Bus- Synchronous 20MB / S, Asynchronous 6.7 MB / S max.  IDE Bus- PIO Mode 4-16MB / S max.
Can convert IDE (ATA / ATAPI) device interface to SCSI
Supports all IDE / ATAPI devices: HDD, CD-ROM, CD-R, PD, DVD- ROM, MO, LS-120
SCSI / CCS compatible: Command set based on SCSI CSS Standard    (Rev. 5.B) Logical specification.   Data bus parity.  Arbitration
.Designed to work with devices with 5.25¡¨ bay sizes
Disconnect and Reconnect functions.
IDSC20A Chips onboard
Supports ANSI ATA-3 Standard
Compact design using IDSC20A IDE-SCSI Converter IC
¡@  SPECIFICATION:
DIMENSIONS: 126.31 mm (W) x 43.75mm (D) x 22.49 mm (H)
ELECTRICAL INPUT: +5 VDC 5%
POWER CONSUMPTION: 50mA (max. 400mA)
REPOOL:  5V 100m Vp-p                    
SCSI INTERFACE: SCSI-2 and SCSI-3 FAST-20, single ended type, 8 bit non-shielded 50 pin connector

SCSI CABLE LENGTH: 1. Other than FAST-20  MAX 6M       2. FAST-20 up to 4 devices   MAX 3M

INTERFACE: SCSI Bus (single engine, 8 bit.)  IDE Bus.  CPU Bus (type H8/3004).  ROM-Type CE.  Oscillator.  Voltage Management.

  other department
[Home][about WINIC][DRIVER index][service & support][FAQ][inquiry form]

WINC WINIC CORP.  Copyright(c)1996  All rights reserved.
5F 298, CHUANG CHING ROAD, TAIPEI, TAIWAN, R.O.C.
TEL: 886-2-27290688/27290673 FAX:886-2-27290677